Every drawer can be retrofitted with divider kits with slotted rail holder as well as with divider kits with insert – any height, depth and width is possible. The considerable difference between the two divider options lies in the way of installing.
The slotted rail holder is stuck to the inside of the drawer. Now the drawer can be divided in various lanes by inserting the aluminium rail. Finally, the sliding dividers are put on the rails. Then the sliding dividers are adjusted to the desired length. As you can see, the installation is very easy.
Using the divider kits with insert, at first a frame is created with four matching dividers. Afterwards, further dividers for the lanes are added onto the frame. At last the sliding divers are adjusted.
Both the aluminium rail and the plastic dividers can be moved easily at any time and be adjusted to the desired subdivision of the lanes (crosswise or lengthwise). With the aluminium rail the lanes can be adjusted to within one centimetre, while using the divider kits with insert the lanes are completely variable. Is it a given that the drawer must be cleaned thoroughly at a regular base, the divider kits with insert are the better choice due to the fact that the entire insert is removable with one hand. Is stability a must, the divider kits with slotted rail holder are recommended. Also for heavy goods the divider kits with slotted rail holder are perfectly suitable.
Every drawer can be divided and with that arranged in order.